说明:之前在centos7下配置过bridge,现在讲bridge模式改为普通模式后,查看网卡的时候还是可以看到很多垃圾信息,想彻底删除自己不想要的网卡配置信息,操作如下:

[root@linux-node1 ~]# ip add list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
 valid_lft forever preferred_lft forever
inet6 ::1/128 scope host 
 valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0
 valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link 
 valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
 valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff

登录后复制

查看网络列表:

[root@linux-node1 ~]# virsh net-list
 Name StateAutostart Persistent
----------------------------------------------------------
 defaultactive yes yes

登录后复制

使用“virsh net-destroy default”删除

[root@linux-node1 ~]# virsh net-destroy default
Network default destroyed

登录后复制

从配置文件中剔除

[root@linux-node1 ~]# virsh net-undefine default
Network default has been undefined

登录后复制

重启libvirtd服务

[root@linux-node1 ~]# systemctl restart libvirtd.service
[root@linux-node1 ~]# virsh net-list
 Name StateAutostart Persistent
----------------------------------------------------------
[root@linux-node1 ~]# ip add list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
 valid_lft forever preferred_lft forever
inet6 ::1/128 scope host 
 valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0
 valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link 
 valid_lft forever preferred_lft forever

登录后复制

再次查看,发现不必要的信息已经清除,清爽多了

以上就是CentOS7上删除virbr0网卡的步骤的详细内容,更多请关注小闻网其它相关文章!

声明:本站所有文章,如无特殊说明或标注,均为本站原创发布。任何个人或组织,在未征得本站同意时,禁止复制、盗用、采集、发布本站内容到任何网站、书籍等各类媒体平台。如若本站内容侵犯了原著者的合法权益,可联系我们进行处理。